Welcome to Kuantan T-Shirts Uniforms Supplier

If you are looking for the best in cool and low cost t-shirts online you have certainly come to the right place. We offer a wide range of tee shirts and apparel for you to choose from. Whether you are looking to purchase a T- shirt as gift, or are selecting one for yourself or work wear, you will surely enjoy browsing out extensive selection. Browse our tee shirts and uniforms now and pick up your shirt today!

KUANTAN T-SHIRTS UNIFORMS SUPPLIER

Thursday 10 August 2017

HIGH GRADE ROYAL BLUE ARAMID INHERENT FIRE RESISTANT COVERALL ON CLEARANCE SALES

No comments:

HIGH GRADE ROYAL BLUE ARAMID INHERENT FIRE RESISTANT COVERALL ON CLEARANCE SALES. 

 

ORIGINAL RATE-RM350.00/PAIR

 

NOW ON CLEARANCE SALES-RM270.00/PAIR

 

 

ROYAL BLUE HIGH GRADE 180GSM ARAMID FLAME RESISTANT COVERALL-INHERENT
ARAMID- INHERENT -FIRE RESISTANT COVERALL


Tired of uniforms or coveralls that don't hold up? Then get the best, we only offer high quality Inherent Fire Resistant Coverall, as per the demands & preferences of our valued clients that will hold up to the harshest of jobs. For great looking and long wearing professional uniforms, Inherent Fire Resistant Coveralls continue to meet the uniform needs of today's industries, with style, comfort, durability, and the largest size offering of uniforms in the business.


Protect yourself from getting burned when working with electrical power, oil and gas, or combustible dust. Arc or Flash Fire can cause serious injury so proper FR protection is a must. Our Inherent Fire Resistant Coverall, which is designed particularly suitable for the demands of the industrial workplace where intermittent exposure to flame or heat is possible or where absorbency of oil & grease is required. 

Therefore, our entire range is extensively used in following industries such as Oil & Gas, Safety Construction, Engineering and Mining. Our line of quality industrial Uniforms help protect at-risk workers, offer quality and reliability helping workers to maneuver freely and do their jobs efficiently.

This series of coveralls are made from Aramid Fabric aka Inherent Flame Resistant fabric that are suitable for users who works in highly volatile environment that requires thermal protection.  


Aramid fabrics are synthetic, heat resistant fabrics. The high level of protection they provide does not come from chemical treatment, but is engineered into the molecular structure of the fabric itself. As a result, the heat and fire retardant qualities of the garment are permanent and will not fade over time.  This fabric also has good static-resistant property and high resistance to industrial.

In a world where lightweight and durable composites are increasingly replacing conventional materials, aramid and para-aramid fibers play an important role. They are essential for reinforcing composites where weight reduction and excellent damage tolerance are required. Many different kinds of composite goods are reinforced with aramid because of the strength, stiffness and dimensional stability of laminates that contain it.
To sum up, aramid general characteristics are:
  • High strength
  • Resistance to absorption
  • Resistance to organic solvent, good chemical resistance
  • No conductivity
  • No melting point
  • Low flammability
  • Excellent heat, and cut resistance
  • Sensitive to acids and ultraviolet radiation



FABRIC SPECIFICATIONS:


  • Garments weight- 180Gsm.
  • Material- ARAMID FR- Meta Aramid-93%, Para Aramid-5%, Anti Static Fabric -2%, Standard Compliance to EN531:1995, EN532:1995 and NFPA 2112 
  • Color Availability-Royal Blue
                                                           
Features :
  • Wear & Tear Resistance.
  • Durable Quality.
  • Shrinkage Resistance-Tested For Maximum 2%.
  • Colorfastness.
  • Resistance To Fire- WHOLE LIFE INHERENT FIRE RESISTANT FABRIC .
  • Packaging-Individually Packed In A Poly-Bag.

Work Wear Applications:

  • Industrial Safety Work Wears.
  • Construction Safety Work Wears.
  • Road Safety Work Wears.
  • Fire Safety Work Wears.
  • Mining Safety Work Wears.                                                                                                                                                                                                                                                                    


    An insight into how cotton can be turned into flame-retardant shirts. Plus how heavy-duty heat-resistant protective overalls are made para-aramid material for use in the metal smelting industry.


    Comparison of Aramid fabric and common FR fabric

    SAFETY COMPLIANT: 
    This garment meets EN531:1995, EN532:1995 NFPA 2112, attached as follows:


    SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
    SIRIM TEST REPORT
                                       
    SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
    SIRIM TEST REPORT

    SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
    SIRIM TEST REPORT
    SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
    SIRIM TEST REPORT


    LAUNDRY CARE AND CLEANING INFORMATION GUIDELINES FOR FIRE RETARDANT UNIFORMS:                                                                                                        

    Wash Water Temperature Settings

    Laundry Wash Key Water Temperature
    IL - Industrial Wash                             Do not recommend more than 165°
    LS - light Soil Wash                             140° wash maximum is light soil formulas
    HW - Home Wash    120° or less in 6 lb. load machine such as used at home

    DO NOT USE Detergents with Bleach
    DO NOT USE Chlorine Bleach
    DO NOT USE Detergents that contain animal fats*
    DO NOT USE Fabric Softener or Dryer Sheets*
    *These are Flammable

    Industrial Laundry

  • Before Wash Zip Up or Button up and Turn Garments Inside Out So As To Avoid Damaging The Reflective Tape, The Zip And To Reduce Streaking From Abrasion.
  • Wash separately from other garments to avoid damaging the luminescent effect.
  • Flame resistant apparel should be washed using soft water (less than 4.0 grains). Hard water adversely affects cleaning, resulting in increased detergent usage. Hard water contains mineral salts that can form insoluble deposits on the surface of fabrics. Sufficient buildup can negate the flame resistant characteristics of the garment, and may serve as fuel if garments are exposed to an ignition source.
  • Use non-ionic formulas. Do not use natural soaps (anionic or tallow soap). Soft water is recommended. Hard water precipitates soaps and contains calcium and magnesium salts. These can build up on the fiber surfaces, coating the fabric and masking luminescent or FR properties.
  • It is important that formulas are developed using detergents and wash temperatures (up to 140ºF) adequate to thoroughly clean all contaminants from garments.
  • Do NOT use Chlorine bleach (sodium hypochlorite) this must be avoided. Repeated exposure to bleach can destroy the luminescent effect.
  • If garments are heavily soiled with particulate or abrasive soils, a flush at 105ºF (40ºC) at the beginning of the cycle will help reduce abrasion in the wash wheel. Wash formulas and load sizes should be set up to minimize re-deposition and fabric abrasion.
  • Starch, fabric softener, and other laundry additives can coat the fiber and mask the FR performance or serve as fuel in case of combustion. Therefore their use is not recommended. Garments should be soured to a pH between 5.5 and 6.5.
  • Use a short extract time to prevent setting wrinkles.
  • Do not over dry. Condition at a stack setting of 165°F so fabric temperature measured in the basket does not exceed 280°F.
  • Proper cool down to 100ºF or less in conditioning is essential for best appearance.
  • Tunnel finishing will improve appearance. Tunnel temperature must not exceed 280ºF on the fabric.
  • If desired, garments may be pressed using a short cycle. Do not exceed a fabric temperature of 280ºF under the press head.
  • Always consult the garment manufacturer for detailed instructions and precautions.                                                                                                                                                                   HomeWash                                                                                                    
  • Before Wash Zip Up or Button up and Turn Garments Inside Out So As To Avoid Damaging The Reflective Tape, The Zip And To Reduce Streaking From Abrasion.
  • Wash separately in a Normal or Cotton cycle at any water temperature up to a maximum of 140ºF (60ºC). Use any typical home laundry detergent. Do not use soap (tallow soap containing animal fats).
  • DO NOT use chlorine bleach or liquid non chlorine bleach.
  • Do not use starch or fabric softeners as they may coat fibers and mask FR performance and/or serve as fuel in the event of garment ignition.
  • The use of conditioned or soft water can help improve removal of contaminants from garments. Hard water precipitates soaps and can result in the build-up of calcium and magnesium salts. These can serve as fuel in the event they are exposed to a source of ignition.
  • It is important that all soils and other contaminants are completely removed from garments during the wash process. This may require the use of stain removal products, ; or pre-soaking garments prior to washing. The use of hot water can often make detergents more effective in the removal of soils. If all contaminants cannot be removed in home care, garments should be dry cleaned.
  • Do not over dry garments. If desired, you may press with an iron on the Permanent Press/Low setting. Exposure to excessive drying temperatures will result in higher than normal shrinkage.
  • Always consult the garment manufacturer for detailed instructions and precautions.

         Dry Clean

  • Either perchloroethylene or petroleum solvent may be used.

         Stain Removal

  • If garments become contaminated with flammable substances, they should be removed immediately and replaced with clean flame resistant apparel. Either home or industrial laundering may successfully remove most types of both flammable and non flammable soils. However, home laundry detergents may not successfully remove some types of soil found in industry, especially heavy greases and oily soils. If flammable soils are not completely removed, the flame resistance of the garment may be compromised.
  • It may be difficult to determine that flammable soils have been completely removed, but indicators would include the presence of stains and/or odors after laundering. However staining alone is not an indication that the soil has not been adequately removed. If it appears that the garments may still be contaminated after home wash, laundering at a local commercial or industrial laundry may be required. Dry cleaning may be used to remove oils and greases. Finally, if questions remain Bulwark will conduct flame resistant testing of the garment in question to determine its flame resistance. Please be aware that this is a destructive test and the garment will be destroyed.
  • Flammable materials are for the most part volatile substances that dissipate into the atmosphere, for example, gasoline. Stains remaining after laundering on the other hand are either un-removed contaminants or, more likely, simply discoloration of the fabric.
  • Always consult the garment manufacturer for detailed instructions and precautions.
    • This information is from the fabric vendor. It is provided for your guidance and knowledge.                                                                                                                                         

      Uniform Silk Screen or Embroidery, Custom Logo, Name Emblems

      We also offer customization services that can be custom screen printed & embroidered with company logo as per the clients’ requirements by providing your company that professional edge to set you above your competition. Our expert can screen print or embroider names or custom logos on t-shirts, work shirts, jackets, coveralls, or other apparels. Let your customers know you mean business with that professional look. Choose from screen printing or name patches or direct text embroidery in a variety of stylish fonts.                                                                                                                                                                                                                                                      
    Continue Reading...

    QUALITY FIRE RETARDANT COVERALLS ON CLEARANCE SALES

    No comments:

     QUALITY FIRE RETARDANT COVERALLS ON CLEARANCE SALES

     

    Save money on your favorite or compulsory Fire Retardant Coveralls or Uniforms gear with Blue Solutions Marketing,Store's Clearance Sale! 

     

    FREE Delivery available ( Terms & Conditions Apply ) - Shop and buy more on quality products with the current Fire Retardant Coveralls OR Uniforms,  clearance sale happening right now.

     

    Normal 100% 200gsm Treated Cotton Fire Retardant Coveralls or Uniforms.

     

    Originally The Rate is RM180.00

     

    NOW ON SALES ! ---RM125.00 Exclude Gst ( Minimum order of 10 units )

    DARK GREEN 100% 200GSM TREATED COTTON FIRE RETARDANT COVERALL
    FIRE RETARDANT COVERALL-FRONT
    DARK GREEN 100% 200GSM TREATED COTTON FIRE RETARDANT COVERALL
    FIRE RETARDANT COVERALL-BACK
    ORANGE 100% 200GSM TREATED COTTON FIRE RETARDANT COVERALL
    FIRE RETARDANT COVERALL-FRONT
    ORANGE 100% 200GSM TREATED COTTON FIRE RETARDANT COVERALL
    FIRE RETARDANT COVERALL-BACK
    BROWN 100% 200GSM TREATED COTTON COVERALL
    FIRE RETARDANT COVERALL-FRONT
    BROWN 100% 200GSM TREATED COTTON FIRE RETARDANT COVERALL
    FIRE RETARDANT COVERALL-BACK
    ORANGE 100% 200GSM TREATED COTTON JACKET AND PANTS FIRE RETARDANT UNIFORM
    TWO PIECE FIRE RETARDANT UNIFORM
    FIRE RETARDANT COVERALL WITH SAFETY COMPLIANT ASPECT
    SAFETY COMPLIANT LABEL

     


     

    Continue Reading...

    Monday 7 August 2017

    WHY YOU SHOULD CONSIDER WESTEX ULTRASOFT FIRE RESISTANTT COVERALL?

    No comments:

    WHY CONSIDER CHOOSING WESTEX ULTRASOFT -FIRE RESISTANT COVERALL?

     

    FIRE RESISTANT COVERALL
    WESTEX ULTRASOFT FIRE RESISTANT COVERALL

    The intense energy and very short duration of an electric arc flash represents a very unique exposure — one that requires flame resistant garments durable enough to withstand temperatures that approach 35,000 °F. Once ignited, regular cotton or poly/cotton work clothes can continue burning even after the source of the ignition is removed. But Westex brand fabric will self-extinguish and provide guaranteed flame resistance for the life of the garment. See the videos for proof of Westex fabrics’ superior FR properties.

     

    Lets Go Behind The Scenes as follows

    It will be a brief into. 



    You may also want to know more about it by clicking the following blog-

     GET TO KNOW WESTEX BY MILLIKEN
    The story behind our commitment: When it Comes to FR Safety, We Are All In!

    Not Being Convinced? Here is more proof....

    Westex Flash Fire Testing Overview

     




    Westex Arc Flash Testing Overview


    HOW WESTEX FLAME RESISTANT CLOTHING IS MADE?


    How Westex Flame Resistant Clothing Is Made


    DOWNLOAD and Read More about Westex Flame Resistant Clothing as below:



    WESTEX FLAME RESISTANT FABRIC CHOICE OF COLORS AVAILABILITY

    WESTEX FLAME RESISTANT FABRIC CHOICE OF COLORS AVAILABLE
    WESTEX FR FABRIC COLORS
    WESTEX ULTRASOFT SAFETY COMPLIANT

    Flame resistant (FR) coveralls, shirts and pants afford workers a few extra seconds of escape time when faced with a flash fire and aim to dramatically reduce or eliminate body burn. FR garments are tested according to a variety of standards. For flash fire, ASTM F1930 (Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin) tells us how to do the manikin test. NFPA 2112 was the standard developed specifically to address flash fire hazards, and uses ASTM F1930 setting a pass/fail limit at 50% burn in a three second exposure.

    There are two independent university labs in North America that conduct the flash fire manikin test, The University of Alberta and North Carolina State University, as well as a third commercial lab owned by DuPont. Westex by Milliken tests extensively at both independent labs in North America, as well as at other labs globally.

    The University of Alberta flash fire manikin test chamber has been in service since 1988. In 2002, the University created its Protective Clothing and Equipment Research Facility (PCERF) with the goal of broadening the scope of thermal protective testing and research capabilities. PCERF collaborates with industry, military and government in the testing and evaluation of innovative protective materials, test protocols and equipment. The University of Alberta has tested virtually all types of flame resistant garments and fabrics over the years.

    Westex by Milliken tests our fabrics at PCERF and annually hosts live test demonstrations for the public to help educate companies and workers on the need for flame resistant (FR) clothing. Attendees witness live flash fire manikin testing of a variety of different FR fabrics to further understand flash fire hazards and to see the huge variance in protection among otherwise compliant products.

    One of the key learnings from this testing is that performance differs not just between fabric categories but also between brands within each fabric category. The NFPA 2112 standard calls for flash fire testing to be conducted at three seconds (per ASTM F1930 test protocol) and less than 50% body burn passes. Unfortunately, because NFPA 2112 is a pass/fail standard, many fabric manufacturers will only report “pass” and many end-users only require compliance to the standard. However, as the University of Alberta’s testing and other lab results show, passing grades can and do vary greatly depending on the fabric type and brand.

    Data from the three different labs in North America can vary slightly, but data should not vary significantly when the testing has been performed in full compliance with ASTM F1930 standards. Issues of data variability and test duration have caused confusion in the market. Since FR fabric brand and weight largely determines the level of protection offered by a protective garment, it is critical for safety managers and other decision-makers to not only understand the real differences among fabrics but also how this impacts performance.

    Those who have attended live flash fire testing at PCERF have walked away with a completely new understanding of hydrocarbon events. The ability to observe garments being tested and see garment performance first-hand has helped shape FR clothing programs for the better. Click here to read testimonials (on page 7) from safety managers at Air Liquide and Suncor Energy who have had the opportunity to attend a testing event at the University of Alberta.

    CLICK TO DOWNLOAD AND READ FULL TEST REPORT AS FOLLOWS:

    EN ISO 11611 - INDURA Ultra Soft Style 301

    EN ISO 11612 - INDURA Ultra Soft Style 301

    NFPA2112 2012

    Style 301 NFPA70E



    FR Clothing: General Cleaning and Care Procedures

    WASH WATER TEMPERATURE SETTINGS

    Laundry Wash KeyWater Temperature
    IL - Industrial WashDo not recommend more than 165°
    LS - light Soil Wash140° wash maximum is light soil formulas
    HW - Home Wash120° or less in 6 lb. load machine such as used at home
    DO NOT USE Detergents with Bleach such as Tide with Bleach
    DO NOT USE Chlorine Bleach
    DO NOT USE Detergents that contain animal fats*
    DO NOT USE Fabric Softener or Dryer Sheets*
    *These are Flammable
    Note:Never Spray DEET on your FR garments, it is highly flammable. If you must use DEET, apply it direct to the skin and NOT the garment.


    General Cleaning and Care For Westex Coverall

    General Cleaning and Care


    General Cleaning and Care For Westex Coverall

    General Cleaning and Care

     

    INDUSTRIAL LAUNDRY

    • Wash separately from other garments to avoid damaging the luminescent effect.
    • Flame resistant apparel should be washed using soft water (less than 4.0 grains). Hard water adversely affects cleaning, resulting in increased detergent usage. Hard water contains mineral salts that can form insoluble deposits on the surface of fabrics. Sufficient buildup can negate the flame resistant characteristics of the garment, and may serve as fuel if garments are exposed to an ignition source.
    • Use non-ionic formulas. Do not use natural soaps (anionic or tallow soap). Soft water is recommended. Hard water precipitates soaps and contains calcium and magnesium salts. These can build up on the fiber surfaces, coating the fabric and masking luminescent or FR properties.
    • It is important that formulas are developed using detergents and wash temperatures (up to 140ºF) adequate to thoroughly clean all contaminants from garments.
    • Do NOT use Chlorine bleach (sodium hypochlorite) this must be avoided. Repeated exposure to bleach can destroy the luminescent effect.
    • If garments are heavily soiled with particulate or abrasive soils, a flush at 105ºF (40ºC) at the beginning of the cycle will help reduce abrasion in the wash wheel. Wash formulas and load sizes should be set up to minimize redeposition and fabric abrasion.
    • Starch, fabric softener, and other laundry additives can coat the fiber and mask the FR performance or serve as fuel in case of combustion. Therefore their use is not recommended. Garments should be soured to a pH between 5.5 and 6.5.
    • Use a short extract time to prevent setting wrinkles.
    • Do not over dry. Condition at a stack setting of 165°F so fabric temperature measured in the basket does not exceed 280°F.
    • Proper cool down to 100ºF or less in conditioning is essential for best appearance.
    • Tunnel finishing will improve appearance. Tunnel temperature must not exceed 280ºF on the fabric.
    • If desired, garments may be pressed using a short cycle. Do not exceed a fabric temperature of 280ºF under the press head.
    • Always consult the garment manufacturer for detailed instructions and precautions.

    HOME WASH

    • Wash separately in a Normal or Cotton cycle at any water temperature up to a maximum of 140ºF (60ºC). Use any typical home laundry detergent. Do not use soap (tallow soap containing animal fats).
    • Turn garments inside out before wash to reduce streaking from abrasion. Fill the washer no more than 2/3 full and use high water level.
    • DO NOT use chlorine bleach or liquid nonchlorine bleach.
    • Do not use starch or fabric softeners as they may coat fibers and mask FR performance and/or serve as fuel in the event of garment ignition.
    • The use of conditioned or soft water can help improve removal of contaminants from garments. Hard water precipitates soaps and can result in the build-up of calcium and magnesium salts. These can serve as fuel in the event they are exposed to a source of ignition.
    • It is important that all soils and other contaminants are completely removed from garments during the wash process. This may require the use of stain removal products, such as Shout®, Spray 'n Wash®, or Zout®; or presoaking garments prior to washing. The use of hot water can often make detergents more effective in the removal of soils. If all contaminants cannot be removed in home care, garments should be dry cleaned.
    • Do not over dry garments. If desired, you may press with an iron on the Permanent Press/Low setting.
    • Always consult the garment manufacturer for detailed instructions and precautions.

    DRY CLEAN

    • Either perchloroethylene or petroleum solvent may be used.

    STAIN REMOVAL

    • If garments become contaminated with flammable substances, they should be removed immediately and replaced with clean flame resistant apparel. Either home or industrial laundering may successfully remove most types of both flammable and non flammable soils. However, home laundry detergents may not successfully remove some types of soil found in industry, especially heavy greases and oily soils. If flammable soils are not completely removed, the flame resistance of the garment may be compromised.
    • It may be difficult to determine that flammable soils have been completely removed, but indicators would include the presence of stains and/or odors after laundering. However staining alone is not an indication that the soil has not been adequately removed. If it appears that the garments may still be contaminated after home wash, laundering at a local commercial or industrial laundry may be required. Dry cleaning may be used to remove oils and greases. Finally, if questions remain Bulwark will conduct flame resistant testing of the garment in question to determine its flame resistance. Please be aware that this is a destructive test and the garment will be destroyed.
    • Flammable materials are for the most part volatile substances that dissipate into the atmosphere, for example, gasoline. Stains remaining after laundering on the other hand are either un-removed contaminants or, more likely, simply discoloration of the fabric.
    • Always consult the garment manufacturer for detailed instructions and precautions.

    DOWNLOAD CLEANING & GARMENT CARE INSTRUCTIONS

    Download Laundry care and cleaning guidelines, also FAQ's about laundering FR apparel. Select the fabric type from the list.


    Do You want your workers to have peace of mind, to arrive home safely, to feel comfortable, and to be productive? Then read on "We Are All In"-please kindly refer to this site for more info-
    When It Comes To FR Safety, We Are All In 





    Disclaimer-
    The contents of this website are generally for sharing useful information and not owned by Blue Solutions Marketing. This website also contains links or references direct to the respectful ownership -Westex Milliken
    Continue Reading...

    Saturday 15 April 2017

    HIGH QUALITY TWO PIECE VERSION ARAMID UNIFORMS

    No comments:

    HIGH QUALITY READY MADE TWO PIECE ARAMID  UNIFORMS.

     

    TWO PIECE VERSION OF JACKET AND PANT MADE OF ARAMID FABRIC OR INHERENT FIE RETARDANT UNIFORM
    TWO PIECE STYLE-JACKET AND PANT


    Tired of uniforms or coveralls that don't hold up? Then get the best, we only offer high quality Inherent Fire Retardant Two Piece Style Uniforms aka Jacket and Pant, as per the demands & preferences of our valued clients that will hold up to the harshest of jobs. For great looking and long wearing professional uniforms, Inherent Fire Retardant Two Piece Style Uniforms  continue to meet the uniform needs of today's industries, with style, comfort, durability, and the largest size offering of uniforms in the business.


    Protect yourself from getting burned when working with electrical power, oil and gas, or combustible dust. Arc or Flash Fire can cause serious injury so proper FR protection is a must. Our Inherent Fire Retardant Two Piece Style Uniform, which is designed particularly suitable for the demands of the industrial workplace where intermittent exposure to flame or heat is possible or where absorbency of oil & grease is required. 

    Therefore, our entire range is extensively used in following industries such as Oil & Gas, Safety Construction, Engineering and Mining. Our line of quality industrial Uniforms help protect at-risk workers, offer quality and reliability helping workers to maneuver freely and do their jobs efficiently.

    This series of Two Piece Style Uniforms are made from Aramid Fabric aka Inherent Flame Retardant fabric that are suitable for users who works in highly volatile environment that requires thermal protection.  


    Aramid fabrics are synthetic, heat resistant fabrics. The high level of protection they provide does not come from chemical treatment, but is engineered into the molecular structure of the fabric itself. As a result, the heat and fire retardant qualities of the garment are permanent and will not fade over time.  This fabric also has good static-resistant property and high resistance to industrial.

    In a world where lightweight and durable composites are increasingly replacing conventional materials, aramid and para-aramid fibers play an important role. They are essential for reinforcing composites where weight reduction and excellent damage tolerance are required. Many different kinds of composite goods are reinforced with aramid because of the strength, stiffness and dimensional stability of laminates that contain it.
    To sum up, aramid general characteristics are:
    • High strength
    • Resistance to absorption
    • Resistance to organic solvent, good chemical resistance
    • No conductivity
    • No melting point
    • Low flammability
    • Excellent heat, and cut resistance
    • Sensitive to acids and ultraviolet radiation



    FABRIC SPECIFICATIONS:


    • Garments weight- 150Gsm.
    • Material- ARAMID FR- Meta Aramid-93%, Para Aramid-5%, Anti Static Fabric -2%, Standard Compliance to EN531:1995, EN532:1995 and NFPA 2112 
    • Color Availability-Orange
    • Jacket Sizes-S,M,L,XL,2XL,3XL
    • Pant Sizes-28,30,32,34,36.38
    Specifications and Features:
    • 2 Front Chest Pockets
    • 2 Hip Pockets
    • 2 Rear Pockets                                                                                                                               
    • 2 Side Leg Pockets                                                                                                                         
    • Pen Slots On Left Sleeves.                                                                               
    • Metal Snap Buttons On Jacket                                                      
    • Pants with Side Elasticized Waist
    • 5 points x 25mm Reflective Striping Tapes Across Arms,Legs and Back. 
    • Comfortable to Wear With Good Moisture Management & Soft Hand Feel      
                                                               
    Features :
    • Wear & Tear Resistance.
    • Durable Quality.
    • Shrinkage Resistance-Tested For Maximum 2%.
    • Colorfastness.
    • Resistance To Fire- WHOLE LIFE INHERENT FIRE RETARDANT FABRIC .
    • Packaging-Individually Packed In A Poly-Bag.

    Work Wear Applications:

    • Industrial Safety Work Wears.
    • Construction Safety Work Wears.
    • Road Safety Work Wears.
    • Fire Safety Work Wears.
    • Mining Safety Work Wears.                                                                                                                                                                                                                                                                    


      An insight into how cotton can be turned into flame-retardant shirts. Plus how heavy-duty heat-resistant protective overalls are made para-aramid material for use in the metal smelting industry.


      Comparison of Aramid fabric and common FR fabric

      SAFETY COMPLIANT: 
      This garment meets EN531:1995, EN532:1995 NFPA 2112, attached as follows:


      SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
      SIRIM TEST REPORT
                                         
      SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
      SIRIM TEST REPORT

      SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
      SIRIM TEST REPORT
      SIRIM TEST REPORT ON ARAMID FABRIC MEANT FOR UNIFORMS
      SIRIM TEST REPORT


      LAUNDRY CARE AND CLEANING INFORMATION GUIDELINES FOR FIRE RETARDANT UNIFORMS:                                                                                                        

      Wash Water Temperature Settings

      Laundry Wash Key Water Temperature
      IL - Industrial Wash                             Do not recommend more than 165°
      LS - light Soil Wash                             140° wash maximum is light soil formulas
      HW - Home Wash    120° or less in 6 lb. load machine such as used at home

      DO NOT USE Detergents with Bleach
      DO NOT USE Chlorine Bleach
      DO NOT USE Detergents that contain animal fats*
      DO NOT USE Fabric Softener or Dryer Sheets*
      *These are Flammable

      Industrial Laundry

    • Before Wash Zip Up or Button up and Turn Garments Inside Out So As To Avoid Damaging The Reflective Tape, The Zip And To Reduce Streaking From Abrasion.
    • Wash separately from other garments to avoid damaging the luminescent effect.
    • Flame resistant apparel should be washed using soft water (less than 4.0 grains). Hard water adversely affects cleaning, resulting in increased detergent usage. Hard water contains mineral salts that can form insoluble deposits on the surface of fabrics. Sufficient buildup can negate the flame resistant characteristics of the garment, and may serve as fuel if garments are exposed to an ignition source.
    • Use non-ionic formulas. Do not use natural soaps (anionic or tallow soap). Soft water is recommended. Hard water precipitates soaps and contains calcium and magnesium salts. These can build up on the fiber surfaces, coating the fabric and masking luminescent or FR properties.
    • It is important that formulas are developed using detergents and wash temperatures (up to 140ºF) adequate to thoroughly clean all contaminants from garments.
    • Do NOT use Chlorine bleach (sodium hypochlorite) this must be avoided. Repeated exposure to bleach can destroy the luminescent effect.
    • If garments are heavily soiled with particulate or abrasive soils, a flush at 105ºF (40ºC) at the beginning of the cycle will help reduce abrasion in the wash wheel. Wash formulas and load sizes should be set up to minimize re-deposition and fabric abrasion.
    • Starch, fabric softener, and other laundry additives can coat the fiber and mask the FR performance or serve as fuel in case of combustion. Therefore their use is not recommended. Garments should be soured to a pH between 5.5 and 6.5.
    • Use a short extract time to prevent setting wrinkles.
    • Do not over dry. Condition at a stack setting of 165°F so fabric temperature measured in the basket does not exceed 280°F.
    • Proper cool down to 100ºF or less in conditioning is essential for best appearance.
    • Tunnel finishing will improve appearance. Tunnel temperature must not exceed 280ºF on the fabric.
    • If desired, garments may be pressed using a short cycle. Do not exceed a fabric temperature of 280ºF under the press head.
    • Always consult the garment manufacturer for detailed instructions and precautions.                                                                                                                                                                   HomeWash                                                                                                    
    • Before Wash Zip Up or Button up and Turn Garments Inside Out So As To Avoid Damaging The Reflective Tape, The Zip And To Reduce Streaking From Abrasion.
    • Wash separately in a Normal or Cotton cycle at any water temperature up to a maximum of 140ºF (60ºC). Use any typical home laundry detergent. Do not use soap (tallow soap containing animal fats).
    • DO NOT use chlorine bleach or liquid non chlorine bleach.
    • Do not use starch or fabric softeners as they may coat fibers and mask FR performance and/or serve as fuel in the event of garment ignition.
    • The use of conditioned or soft water can help improve removal of contaminants from garments. Hard water precipitates soaps and can result in the build-up of calcium and magnesium salts. These can serve as fuel in the event they are exposed to a source of ignition.
    • It is important that all soils and other contaminants are completely removed from garments during the wash process. This may require the use of stain removal products, ; or pre-soaking garments prior to washing. The use of hot water can often make detergents more effective in the removal of soils. If all contaminants cannot be removed in home care, garments should be dry cleaned.
    • Do not over dry garments. If desired, you may press with an iron on the Permanent Press/Low setting. Exposure to excessive drying temperatures will result in higher than normal shrinkage.
    • Always consult the garment manufacturer for detailed instructions and precautions.

             Dry Clean

    • Either perchloroethylene or petroleum solvent may be used.

             Stain Removal

    • If garments become contaminated with flammable substances, they should be removed immediately and replaced with clean flame resistant apparel. Either home or industrial laundering may successfully remove most types of both flammable and non flammable soils. However, home laundry detergents may not successfully remove some types of soil found in industry, especially heavy greases and oily soils. If flammable soils are not completely removed, the flame resistance of the garment may be compromised.
    • It may be difficult to determine that flammable soils have been completely removed, but indicators would include the presence of stains and/or odors after laundering. However staining alone is not an indication that the soil has not been adequately removed. If it appears that the garments may still be contaminated after home wash, laundering at a local commercial or industrial laundry may be required. Dry cleaning may be used to remove oils and greases. Finally, if questions remain Bulwark will conduct flame resistant testing of the garment in question to determine its flame resistance. Please be aware that this is a destructive test and the garment will be destroyed.
    • Flammable materials are for the most part volatile substances that dissipate into the atmosphere, for example, gasoline. Stains remaining after laundering on the other hand are either un-removed contaminants or, more likely, simply discoloration of the fabric.
    • Always consult the garment manufacturer for detailed instructions and precautions.
      • This information is from the fabric vendor. It is provided for your guidance and knowledge.                                                                                                                                         

        Uniform Silk Screen or Embroidery, Custom Logo, Name Emblems

        We also offer customization services that can be custom screen printed & embroidered with company logo as per the clients’ requirements by providing your company that professional edge to set you above your competition. Our expert can screen print or embroider names or custom logos on t-shirts, work shirts, jackets, coveralls, or other apparels. Let your customers know you mean business with that professional look. Choose from screen printing or name patches or direct text embroidery in a variety of stylish fonts.                                                                                                                                                                                                                                                      
      Continue Reading...